I upgraded to windows 7 64 bit.
The hardware issue may or may not be resolved.
The printer lights up, makes a noise, takes forever and printing then spits out a blank page.
On the front panel windows of the All-in-One, press Setup then press 1 and windows then press.The default settings even for an owner/user do not always have the permission to print turned.If you are receiving an error "Out of Paper" on the printer, then it will considered as a Hardware malfunction problem.This is a bit late in the game, but so. .Salson, you have only mentioned that the printer won't print, but plz be clear about the issue, so that I can help you in the best way.If printer fails to print and windows then error message displayed on the printer LCD screen, then perform the steps given in the blow link. The problem is quicken windows and 64 bit are not compatible.The suggested answers didn't work for me, but did lead to a solution. .There is a distinct priority order of tasks that lead to a successful print.The issue is with the software part.Complete that task and then set up Quicken to use the new driver/printer (be sure not to select the same old printer/driver that was not working - it will probably still be present if you have not deleted or otherwise removed it - and its. I cannot get quicken to print anything.First: Get the latest printer driver (for your printer) windows that is designed to run under Windows 7 and install. .PSC 2500, if you are unable to print a self test report, then try to make a copy from the front panel of the printer, by placing a text document on the scanner glass and then press color copy button. Everything else such as office prints fine on the printer.
This quicken is a known problem and I have tried all the solutions offered by Quicken.
Still using Quicken 2006 with HP photosmart C5440 printer.
Here is the web link to donwload the print diagnostic utility.It will telephone work for both, hP PSC 2400 series,.That may be all too obvious, but Windows 7 seems to have from some default drivers that it uses that will work with most (but NOT ALL) programs and printers.By looking at the pic of guild the printer, it seems that you are keygen using PSC 2500 printer, so perform the below steps on the printer gsm-forum itself.By the way I just went through the Quicken help session (April of 2011) and they do not check for either the first or second steps listed above. Is there any way to trick the program into thinking it is a 32 bit printer?Second: See that you have permissions to print set in your user profile. .However, wars to check the hardware functionality of the printer, perform the below steps on the printer to print a self test report.If the printer prints a test report or makes a copy, then it confirms that the printer is working fine.If it on your computer (Under the printer icon) then it will be a software issue. Status, solved, priority, medium, security, keygen public, views 2139.
Hope this will helps you.